Products
Home

Split Core Current Transformer

Indoor Clamp-on Type

Vertical Type Leakage Current Transformer RCT Series Residual current transformer

Vertical Type Leakage Current Transformer RCT Series Residual current transformer

RCT Series leakage current transformer is used for the collection of residual current, and can be used with electrical fire monitoring devices, motor protection devices and residual current relays.The secondary output of this product is 0~0.5mA or 0~1V. There are round hole type and square hole type for users to choose according to their needs.

  • Product Detail

Key Properties:

RCT Serirs leakage current transformer is used for the collection of residual current, which called residual current transforemr too. It can be used for electrical fire monitoring device, motor protection device and residual current relay. The residual current transformer with primary input 3mA~30A,  1000:1 turn ratio, the secondayr output of this part is 0~1V OR 0~0.5mA.
It's including different inner hole size options from 25mm to 200mm , to meet different installation request.
The standard terminal length 1000mm, if any customized length request, that's supportted.

General parameters:

  • Rated Input Current 30mA~3A
  • Rated Output Current 0~1V OR 0~0.5mA
  • Burden Resistance ≥330ohm
  • Over Load Resistance ≥400ohm
  • Rated Accuracy Error ±0.5%
  • Linearity ≤0.5%@10%In~130%In
  • Frequency 50 Hz ~400Hz
  • Working Temperature Range -12℃~+50℃
  • Terminal L=1000mm
  • Dielectric Withstanding Voltage 2500V/0.3mA/3S


Customized design based on below product  details:

  • Current Input (AC, DC):
  • Current Output / Voltage Output:
  • Turns Ratio:
  • Accuracy:
  • Size request:
  • Inner Hole Diameter:
  • Is it Split core type or Ring type:


Main Application:

Our Residual current transformercan be used with electrical fire monitoring devices, motor protection devices and residual current relays:

Electrical fire monitoring system, power supply monitoring system for fire fighting equipment, smart power system, smart grid, station area transformation, environmental protection extra testing, small current grounding system, relay protection, motor protection system.





As an leading manufacturer of amorphous and nanocrystalline core products, Coilcore provides quality services to customers with high-performance products and one-stop solutions. By leaving a message below to get more details about Residual current transformer quickly!

Leave A Message

If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Related Products
Split Core Ct
Split Core Current Transformer

Split-core current transformers are designed to meet the growing demand of installation into existing networks. Our Split Core (open-able) CTs can be a savings overall in the labor cost savings.Simply clip these around the wires being read. Secure them in place with a zip tie, without disconnecting cables or busbar circuits.

Split Core Ct
Clamp On Type Square Split Core Current Transformer

Split Core Current Transformer is suitable for indoor units with rated voltage of 10KV and below. It's for circuit control, measurement, line transformation measurement and protection.

Split Core Ct
Clamp On Sensor 500A : 1A Ring Core Split Core Current Transformer

Split Core Current Transformer is suitable for indoor units with rated voltage of 10KV and below. It's for circuit control, measurement, line transformation measurement and protection.

Hall Sensor
Open Loop Split Core Hall Sensor Hall Effect DC/AC Current Sensor

An open loop device hall effect current Sensor based on the measuring principle of the hall effect, with a galvanic isolation between primary and secondary circuit. It provided to measure DC, AC and pulse current and another arbitrary waveform current.

Hall Sensor
Open loop current transducer DC+5V Hall Sensor

THK600 EKA5S2  Open loop current transducer using the hall effect for the electronic measurement of current: DC, AC, Pulsed, with galvanic separation between primary circuit and secondary circuit, which supply voltage DC+5.0V.

EMI Filter
40KW Photovoltaic Line Filter Inductor

Line filter is a kind of reflection filters, designed for electromagnetic interference (EMI) in the mains, and it is a frequency-selective two-port network usually composed of inductors, capacitors, resistors.

200uh power inductor
Vertical Type Flat Copper Wire Power Inductor 200uH 150A EV Charge Pole Inductor

This 200uH power inductor is vertical type design, manufactured with Iron Power Core & 1*8*2P QZY-2 Copper Wire. With flat wire surface area up to 60% more perfect performance of 150uh@250A, popular in EV Pole Charge application.

EMI Filter
40KW Photovoltaic AC Output EMI Filter

The AC Output EMI Filter with fewer winding turns, but higher inductance,compact size of low temperature rising, capable of long-term operation at higher working temperatures

© Copyright: 2024 Guangzhou Amorphous Electronic Technology Co.,ltd. All Rights Reserved. 粤ICP备2021057165号

IPv6 network supported

IPv6 network supported

top

Leave A Message

Leave A Message

    If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

  • #
  • #
  • #
  • #